How to make : chair a seat concrete
And cheap
Hello again
In this lesson you will learn
How to make a chair as picture
- Step by Step -
MATERILS
WE NEED :
* bucket
* Water
* Concrete
* 03 Wooden stick
AS THIS PICTURE
STEP 1:
First Put about 3 inches of concrete mix in the bucket clean and dry
Add some water and start mixing. Be careful not to over water the concrete or it will be weak and crumble. Thoroughly mix the concrete so that every grain of the mix is wet.
Mixed concrete has air bubbles trapped inside. Shake and tap the bucket to bring the bubbles to the surface.
STEP 2:
then = Place Wooden stick
Once the concrete has settled, place Wooden stick in the bucket.and let them rest against the sides of the bucket.
____________
STEP 3:
You can Wait About 18-24 hours then remove
Bend the sides of the bucket outwards a few times in each direction to loosen the concrete; then pull the stool out by Wooden stick
Now
Sand the edges
sand paper can be used to smooth the edges
the result
0 commentaires:
Enregistrer un commentaire