how to turn your charger cable into a spiral cord.
Notice : Have you ever noticed that when your charger cord is not spiral, you are usually ending it up tangled?
So we decided to share this one just for you to make your daily life easier. Cellphone charger has become an essential accessory that we usually take with us. Like all the cables, however, it is important to keep it in order so you can use it easily without losing patience. This odd hack shows you how to turn it into a spiral cable, much more comfortable and versatile.
a coiled cord, which takes up less space, gets less tangled and looks a whole lot better. And it turns out it's fairly easy to convert your straight cables into coiled ones.
Here's what you need:
material
- A full-length pencil
- Masking tape or small binder clips
- A hair dryer
Step 1:
Using tape or a binder clip, secure one end of your cable to one end of the pencil, leaving maybe an inch of cord from the tape/clip spot. (I started experimenting with the binder clips because masking tape left sticky residue on both ends of my cable. Blue painter's tape might be a better option, but I didn't have any on hand.)
Step 2:
Tightly wrap the cord around the pencil, working your way all the way to the other end. Once you've got about an inch remaining, apply another piece of tape or your other clip.
Step 3:
Turn on your hair dryer and point it at the coiled cable for about 1 or 2 minutes. (I tried 90 seconds on the Lightning cable, and the resulting coil was definitely "looser" than I was hoping.) Keep it 3-4 inches away, and make sure to heat the cable all over, not just on one side.
Step 4:
You're done! Let the cable cool completely -- at least 5 minutes. Then remove the tape/clips, slide out the pencil, and presto: one nicely coiled cable.
So what can you say about this one? Share us your thoughts in the comments below. And also, share this post to your family and friends online.
0 commentaires:
Enregistrer un commentaire